STOLIT P glue is used for facing with ceramic tiles non-deformed bases of walls and floors that do not work for bending, which are used inside and outside buildings in normal conditions and in conditions of high humidity.
The main advantages of this product are high adhesion to the base, frost resistance, resistance to sliding on vertical surfaces, water resistance, environmental friendliness.
|Composite||cement, mineral fillers, polymer additives|
|Water Consumption||5.0 – 5.5 l per 25 kg of dry mixture|
|Time of possible technological application||allowed after 48 hours|
|Time of use (expiry date) of the solution mixture||up to 2 hours|
|Open time||up to 40 minutes|
|Time of correction||up to 25 minutes|
|Tile Offset||no more than 0.5 mm|
|Strength of adhesion to the base after exposure to air-dry conditions||over 0.8 MPa|
|Strength of adhesion to the base after exposure to water||not less than 0.8 MPa|
|Strength of adhesion to the base after alternating freezing and thawing, 50 cycles||not less than 0.6 MPa|
|Base temperature||from +5 °С to +30 °С|
|Operating temperature||from -30 °С to +70 °С|
|Consumption of mortar mixture depending on the size of the spatula teeth and unevenness of the base||from 2 to 4 kg/m²|