Glue for ceramic granite “STOLIT P+ PROFI” is a mixture of high-quality cement, mineral fillers and chemical additives for gluing all types of facing tiles with a water absorption of no more than 3% on horizontal and vertical surfaces outside and inside buildings.
Due to its increased strength and plasticity, “STOLIT P+ PROFI” glue is used for gluing ceramic granite, grease tiles, and arranging heated floors.
The glue is plastic, has increased adhesion to the base, is resistant to sliding on vertical surfaces, is moisture-resistant and environmentally friendly.
Technical data:
| Composite | cement, mineral fillers and polymer additives |
| Water Consumption | 5.0 – 5.5 l per 25 kg of dry mixture |
| Time of possible technological application | allowed after 48 hours |
| Time of use (expiry date) of the solution mixture | up to 2 hours |
| Open time | up to 40 minutes |
| Time of correction | up to 25 minutes |
| Tile Offset | no more than 0.5 mm |
| Strength of adhesion to the base after exposure to air-dry conditions | over 0.8 MPa |
| Strength of adhesion to the base after exposure to water | not less than 0.8 MPa |
| Strength of adhesion to the base after alternating freezing and thawing, 50 cycles | not less than 0.6 MPa |
| Base temperature | from +5 °С to +30 °С |
| Operating temperature | from -30 °С to +70 °С |
| Consumption of mortar mixture depending on the size of the spatula teeth and unevenness of the base | from 2 to 4 kg/m² |
